Statistical Methods and their Applications
Statistical Methods and their ApplicationsSyllabus
Unit-1
Introduction:


Importance and Scope of Statistics.
In modern times, Statistics is viewed not as a mere device for collecting numerical data but as a means of developing sound techniques for their handling and analysis and drawing valid inferences from them. As such it is not confined to the affairs of the State but is interfering constantly into various diversified spheres of life-social, economic and political. It is now finding wide applications in almost all sciences-social as well as physical-such as biology, psychology, education, economics, business management, etc. It is hardly possible to enumerate even a single department of human activity where statistics does not creep in. It has rather become indispensable in all phases of human endeavour.1. Statistics and PlanningStatistics is indispensable to planning. In the modem age which is termed as 'the age of planning', almost all over the world governments, particularly of the budding economies, are resorting to planning for the economic development. In order that planning is successful, it must be based soundly on the correct analysis of complex statistical data. In addition to that Modern states being welfare- oriented states, the collection of statistics is done to solve various problems and to frame suitable policies to solve these problems.2. Statistics and BusinessStatistics is an indispensable tool of production control also. Business executives are relying more and more on statistical techniques for studying the needs and the desires of the consumers and for many other purposes. The success of a businessman more or less depends upon the accuracy and precision of his statistical forecasting. Wrong expectations, which may be the result of faulty and inaccurate analysis of various causes affecting a particular phenomenon, might lead to his disaster. Suppose a businessman wants to manufacture readymade garments. Before starting with the production process, he must have an overall idea as to 'how many garments are to be manufactured', 'how much raw material and labor is needed for that', and 'what is the quality, shape, color size, etc., of the garments to be manufactured'. Thus, the formulation of a production plan in advance is a must which cannot be done without having quantitative facts about the details mentioned above.
Following are some of the typical application areas :
A). Quality Management: Statistical quality control (SQC) helps in separating the assignable causes from the chance causes. SQC techniques also help in reducing and stabilizing process variation that may reduce cost significantly.
B). Process Capability: It enables us to find out whether the enterprise is capable of meeting customer specification. If it is not meeting customer requirements, then management has to take decisions regarding the modernization of plant, change the technology etc. to achieve process capability. Statistics plays crucial role in this field.
C). Finance: Through Financial ratio analysis, key financial ratios are worked out, by using the Balance sheet and income statement data, to know the financial health of an enterprise. Comparative statistical analysis reveals the performance of the company in the past years and the emerging trends in the future.
D). Cash Forecasting: Financial analyst has to forecast cash requirements to meet short term obligations for example payment of salary, working capital, payments to suppliers etc. statistical analysis helps in working out realistic cash forecasting.
E). Materials Management: Inventory level, by using appropriate statistical methods one can maintain optimum inventory levels of raw materials and finished products and thus savings are made which impact the profit.
F). Quality assessment for incoming and outgoing items: Statistical sampling techniques help in ensuring quality of incoming and outgoing items. Raw materials and other items are checked for quality to meet customer's needs and inspection of finished products is done on sample basis to reduce complaints from customers.
G). Marketing: Marketing research provides solutions to various problems involved in marketing goods, services or ideas. In this context systematic collection, analysis and interpretation of marketing data is done by using statistical methods. Marketing decisions involve the introduction of new product, reaction of consumers to price like, effectiveness of advertisement campaign etc...
H). Demand Projections: Short term and long term demand projections are required for the company products and services. These projections are required both for the domestic and international markets. Statistical surveys and analysis of the past time series data relating to industry provides reliable sales and demand projections. 3. Statistics and Mathematics
Statistics and mathematics are very intimately related. Recent advancements in statistical techniques are the outcome of wide applications of advanced mathematics. Main contributors to statistics, namely, Bernouli, Pascal, Laplace, De-Moivre, Gauss, R. A. Fisher, to mention only a few. were primarily talented and skilled mathematicians. Statistics may be regarded as that branch of mathematics which provided us with systematic methods of analys- ing a large number of related numerical facts. According to Connor, "Statistics is a branch of Applied Mathematics which specialises in data." Increasing role of mathematics in statistical analysis has resulted in a new branch of Statistics called Mathematical Statistics.
4. Statistics and Industry
In industry, Statistics is very widely used in 'Quality Control', in production engineering, to find whether the product is conforming specifications or not, statistical tools, viz., inspection plans, control charts, etc., are of extreme importance. In inspection plans we have to resort to some kind of Sampling a very important aspect of Statistics.
5. Statistics and Economics
According to F.C.Mills, "Statistics is an Statistics and Economics. Statistical data and technique of statistical analysis have proved im.nensely useful in solving a variety of economic problems, such as wages, prices, analysis of time series and demand analysis. It has also facilitated the development of economic theory. Wide applications of mathematics and Statistics in the study of economics have led to the development of new disciplines called Economic Statistics and Econometrics. In the field of production, we can study the effect of certain incentives on production. Again, it is with the help of statistical techniques that we can know the effectiveness of economic policies on production. 6. Statistics and Biology, Astronomy and Medical Science
The association between statistical methods and biological theories was first studied by Francis Galton in his work in 'Regression'. According to Prof. Karl Pearson, the whole 'theory of heredity' rests on statistical basis. He says, "The whole problem of evolution is a problem of vital statistics, a problem of longevity, of fertility, of health, of disease and it is impossible for the Registrar General to discuss the national mortality without an enumeration of the population, a classification of deaths and knowledge of statistical theory."In astronomy, the theory of Gaussian 'Normal Law of Errors' for the study of the movement of stars and planets is developed by using the 'Principle of Least Squares'.In medical science also, the statistical tools for the collection, presentation and analysis of observed facts relating to the causes and incidence of diseases and the results obtained from the use of various drugs and medicines, are of great importance. Moreover, the efficacy of a manufactured drug or injection or medicine is tested by using the 'tests of significance - (t-test).
7. Statistics and Psychology and Education In education and psychology, too, Statistics has found wide applications, e.g., to determine the reliability and validity of a test, 'Factor Analysis', etc., so much so that a new subject called 'Psychometry has come into existence.
8. Statistics and War In war, the theory of 'Decision Functions' can be of great assistance to military and technical personnel to plan 'maximum destruction with minimum effort'. Thus, we see that the science of Statistics is associated with almost all the sciences - social as well as physical. Bowley has rightly said, "A knowledge of Statistics is like a knowledge of foreign language or of algebra; it may prove of use at any time under any circumstance."
Reference: Fundamentals of Mathematical Statistics, S.C. Gupta and V.K. Kapoor
Limitations of Statistics
Although Statistics has a very wide application in everyday life as well as in Behavioral Sciences, Physical and Natural Sciences, it has certain limitations also. These limitations are as follows:
1. Statistics deals with aggregate of facts.
2. It cannot deal with single observation. Thus statistical methods do not give any recognition to an object or a person or an event in isolation. This is a serious limitation of Statistics.
3. Since Statistics is a science dealing with numerical data, it is more applicable to those phenomena which can be measured quantitatively.
4. However, the techniques of statistical analysis can be applied to qualitative phenomenon indirectly by expressing them numerically with the help of quantitative standards.
5. Statistical conclusions are true only on the average. Thus, statistical inferences may not be considered as exact as inferences based on Mathematical laws.
Source: B.L.Aggrawal (2009). Basic Statistics. New Age International Publisher, Delhi.
Classification of data:
The important object of the statistics is to simplify the complexities. A large complex data is not capable of suggesting anything unless, it is to be divided into groups with respect to their nature. Then, it is done according to kind of character, separate the similar from the dissimilar and bring out the distinguishing features. Thus, it enables to comparison and drawn the conclusions without unnecessarily considering hundreds of individual numbers. Hence, the process of dividing the objects or things into different classes based on their character or feature is known as classification of data.
Types of Classification
Broadly, data can be classified under following categories:(i) Geographical classification(ii) Chronological classification(iii) Qualitative classification(iv) Quantitative classification
(i) Geographical Classification
In geographical classification, data are classified on the basis of location, region, etc. For example, if we present the data regarding production of sugarcane or wheat or rice, in view of the four main regions in India, this would be known as geographical classification.
Region Wise Production of Wheat in India
The data can be classified based on more than two variables that can be measured numerically. For example, the employees of a company may be classified according to their designation, Age as well as gender as follows:
Age, Designation and Gender Wise Employes's in a Company
Source: Sinha, S.C. and Dhiman, A.K. 2002. Research Methodology, Vol. 1. Ess Publication, New Delhi.
Where:
and are the sample sizes of the two groups.
and are the standard deviations of the two groups.
and are the means of the two groups.
Skewness:
The word skewness refers to lack of symmetry. Asymmetrical distribution is called as skewness distribution. Skewness describes how much statistical data distribution is asymmetrical or deviated from the normal distribution, where distribution is equally divided on each side. If a distribution is not symmetrical or normal, it is known as skewed, i.e., the frequency distribution skewed to the left or right. Skewness is a measure of the asymmetry of a distribution.
Symmetric Distribution
Types of Skewness
A) Positive Skewness (Right Skewness Distribution):
If the given distribution is shifted to the left and its tail on the right side, it is called positively skewed distribution. It is also called the right-skewed distribution. A positively skewed distribution assumes a skewness value of more than zero. Since the skewness of the given distribution is on the right, the mean value is greater than the median and it moves towards the right, and the mode value occurs at the highest point on the left side.
Positive Skewed Distribution
Mean > Median > Mode
B) Negative Skewness (Left Skewness Distribution):
If the given distribution is shifted to the right and its tail on the left side, it is called negatively skewed distribution. It is also called the left-skewed distribution. A negatively skewed distribution assumes a skewness value of less than zero. Since the skewness of the given distribution is on the left, the mean value is less than the median and it moves towards the left, and the mode value occurs at the highest point on the right side.
Negative Skewed Distribution
Mean < Median < Mode
Moments:
Central Moments (Moments about mean)
The rth moment about mean is defined as
Non-Central Moments (Moments about zero)
The rth moment about zero is defined as
Non-Central Moments (Moments about arbitrary constant)
The rth moment about an arbitrary constant A is defined as
Absolute Measures of Skewness:
The following are known as absolute measures of skewness:
1. Skewness (Sk) = Mean - Median
2. Skewness (Sk) = Mean - Mode
3. Skewness (Sk) = (Q3 - Q1) - (Q2 - Q1)
Relative Measures of Skewness:
In order compare the two or more series, one can use relative measures
A. Karl Pearson's Coefficient of Skewness:
It is proposed by Karl Pearson and is most frequently used for measuring skewness. The formula for measuring skewness:
Note: 1. It lies between +1 and -1
2. If mean = mode, the distribution is symmetric.
3. If mean > mode, the distribution is positive skewed.
4. If mean < mode, the distribution is negative skewed.
Note: 2. If mode id ill-defined then one can use inter relationship between mean, median and mode (i.e., Mode= 3 Median - 2 Mean) for the formula for coefficient of skewness is
2. If Skb =0, the distribution is symmetric.
3. If Skb > 0, the distribution is positive skewed.
4. If Skb <0, the distribution is negative skewed.
The formula for calculating Skewness is (Based on Deciles)
1. If beta1 =0, the distribution is symmetric.
3. If beta1 > 0, the distribution is positive skewed.
4. If beta1< 0, the distribution is negative skewed.
Another measure for getting complete idea about the shape of distribution is known as Kurtosis. It is also proposed by Karl Pearson and he called it is "Convexity of a Curve".
The curve with greater peakedness than normal curve is called Lepto kurtic. The curve with more flat than normal curve is known as Palty Kurtic. The Normal Curve is known as Mesokurtic. The following figure mentions different curves.
(B). Kelly's Measure of Kurtosis:
For a distribution Karl Pearson’s coefficient of skewness is 0.64, standard deviation is 13 and mean is 59.2 Find mode and median.
Example 2:
Karl Pearson’s coefficient of skewness is 1.28, its mean is 164 and mode 100, find the standard deviation.
Example 3:
For a frequency distribution the Bowley’s coefficient of skewness is 1.2. If the sum of the 1st and 3rd quarterlies is 200 and median is 76, find the value of third quartile.
Example 4:
For the following data relates to marks of 150 students. Find the Karl Pearson and Bowley's coefficient of skewness.
|
Marks |
0-10 |
10-20 |
20-30 |
30-40 |
40-50 |
50-60 |
60-70 |
70-80 |
|
No. of Students |
10 |
40 |
20 |
0 |
10 |
40 |
26 |
14 |
|
Height (In inches) |
No of Persons |
|
58 |
10 |
|
59 |
18 |
|
60 |
30 |
|
61 |
42 |
|
62 |
35 |
|
63 |
28 |
|
64 |
16 |
|
65 |
8 |
UNIT-V
(Correlation and Regression)
Correlation Analysis:
Meaning:
Correlation is a statistical technique to ascertain the association or relationship between two or more variables.
Definitions:
“When the relationship is of a quantitative nature, the appropriate statistical tool for discovering and measuring the relationship and expressing it in self-formula is known as correlation.”
----------Croxton & Cowden
2. “When two or more quantities vary in sympathy so that movements in the one tends to be accompanied by corresponding movements in the others, then they are said to be correlated.”
---- L.R.Connor
3. “Correlation analysis attempts to determine the degree of relationship between variables.”
--------- Ya Lun Chow
4. "Correlation is an analysis of the covariation between two or more variables"
—AM Tuttle
Types of Correlation:
Correlation classified in several different ways. The most important correlation are as follows:
1. Positive or Negative or Zero.
2. Simple, Partial and Multiple.
3. Linear and Non-linear.
Positive and Negative Correlation:
If both the variables vary in the same direction, correlation is said to be positive. It means if one variable is increasing, the other on an average is also increasing or if one variable is decreasing, the other on an average is also deceasing, then the correlation is said to be positive correlation. Example:
If both the variables vary in the opposite direction, correlation is said to be negative. It means if one variable is increasing, the other on an average is decreasing or if one variable is decreasing, the other on an average is also increasing, then the correlation is said to be negative correlation. Example:
When one can’t find any relationship between the variables then, it is said to be zero correlation. It means a change in value of one variable doesn’t influence or change the value of another variable. Example:
Simple, Partial and Multiple Correlation
When one can studied only two variables, it is a case of simple
correlation. Example:
If one can studied three or more variables but considers only two variables to be influencing each other and the effect of other influencing variables being held constant is known as Partial correlation. Example:
When three or more variables are studied, it is a case of multiple correlation. Example:
Linear and Non-linear Correlation
If the amount of change in one variable bears a constant ratio to the amount of change in the other variable, then correlation is said to be linear.
If the amount of change in one variable does not bear a constant ratio to the amount of change to the other variable, then correlation is said to be non-linear.
Methods of Measuring Correlation
Various methods are used to measure correlation. The commonly used methods are
a) Scatter diagram method
b) Karl Pearson's method
c) Spearmen's method
d) Concurrent deviation method.
a) Scatter Diagram Method
This method is also known as Dotogram or Dot diagram. Scatter diagram is one of the simplest methods of diagrammatic representation of a bivariate distribution. Under this method, both the variables are plotted on the graph paper by putting dots. The diagram so obtained is called "Scatter Diagram".
Merits:
1. This method helps us to form a rough idea about the nature of the relationship between the two variables only inspection of the grap.
2. The method is not affected by extreme observations whereas mathematical formulae of determining correlation between two variables are affected by extreme items.
3. This method helps us to get an approximate estimating line or the line of best fit by free hand method. This method consists of the line drawn through the plotted points to locate the best possible line.
Demerits:
1. This method is not suitable if the number of observations are sufficiently large.
2. This method does not provide an exact measure of the extent of the relationship between the two variables.
Product Moment Method or Karl Pearson's Correlation coefficient:
Kart Pearson, a reputed statistician, in 1890, has constructed a well set formula based on mathematical treatment for determining the coefficient of correlation. The formula is named after his name as Karl Pearson's formula and is popularly known as 'Karl Pearson's coefficient of correlation. I is also named as Product moment coefficient.
Spearmen's Rank Correlation Coefficient:
When quantification of variables becomes difficult such beauty of female, leadership ability, knowledge of person etc, then this method of rank correlation is useful which was developed by British psychologist Charles Edward Spearman in 1904. In this method ranks are allotted to each element either in ascending or descending order. The correlation coefficient between these allotted two series of ranks is popularly called as “Spearman’s Rank Correlation".
Merits:
· 1. It is easy to calculate and understand as compared to Pearson's r.
· 2. When the ranks of different values of the variables are given, it is then the only method left to calculate the degree of correlation.
· 3. When actual values are
given and we are interested in using this formula then, we have to give ranks
to calculate correlation.
· 4. This method is employed
usefully when the data is given in a qualitative nature like beauty, honesty,
intelligence etc.
Demerits:
· 1. This method cannot be
employed in a grouped frequency distribution.
· 2. If the items exceed 30,
it is then difficult to find out ranks and their differences.
· 3. This method lacks
precision as compared to Pearson's co- efficient of correlation, as all the
information concerning the variables is not used. It is just possible that the
difference between r, and r may be very insignificant.






































The experiences we create define the impact we leave on learners and educators alike. Whether it’s through clear guidance, structured support, or meaningful feedback, every interaction contributes to academic growth. High-quality solutions such as academic writing services help students navigate challenges with confidence, ensuring their learning journey feels supported rather than overwhelming. Ultimately, the goal is to create experiences that empower students, build skills, and inspire long-term academic success.
ReplyDelete